ru ru
Catalog
Services
News
About us
Partners
Contacts
IDM+ chip image
Precision in Everything We develop best solutions in the field of precision position sensors
Manufacture of electronic modules and devices
New compact, light-weight, precise low cost encoders and with unique characteristics
Mechanical conversion VLSI circuit of physical quantity
IDM-PLUS solutions concerning mechanical conversion of physical quantity
Read more
Performing R and D works
Order Research and Development works
PROGRAM OF DEVELOPMENT AND INNOVATION We develop the best solutions and invest in new developments to always be ahead
NEWS DEVELOPMENT PARTNERSHIP
Sensor ICs
Angular position sensors with shaft
Linear motion sensors
Electronic modules and PCB
Advanced development
All products
MagneticMAPS-360-M5
product_idm_1
The MAPS-360-M5 is a compact, high-speed magnetic angular position sensor designed for use in harsh environments. Traditional design makes it easy to integrate the MAPS-360-M5 angular position sensor into existing and newly developed systems.
Measuring range from 0 to 360
Absolute measurement error in the whole range: not more than ± 0,4°
Sensor resolution: 12-13 bits
Supply voltage: (5 ± 0.5) V
Current consumption is not more than 40 mA
Output signal BiSS / SSI / Incremental / Analog
Max. shaft speed: 8000 rpm
Temperature range -60С + 125С
More
Send request
MagneticMAPS-360-M7
product_idm_1
The MAPS-360-M7 is a compact, high-speed magnetic angular position sensor designed for use in harsh environments. Traditional design makes it easy to integrate the MAPS-360-M7 angular position sensor into existing and newly developed systems.
Measuring range from 0 to 360
Absolute measurement error in the whole range: not more than ± 0,4 °
Sensor resolution: 12-13 bits
Supply voltage: (5 ± 0.5) V
Current consumption is not more than 40 mA
Output signal BiSS / SSI / Incremental / Analog
Max. shaft speed: 8000 rpm
Temperature range -60С + 125С
More
Send request
MagneticSLP-360-M1
product_idm_1
This version with a measuring wheel on the shaft allows to measure movements with high accuracy. The main area of application of this encoder is industrial conveyors.
The measuring range: 0 to 360
Absolute error of measurements in the whole range: not more than ± 0,4 °
Sensor resolution: 12-13 bits
Supply voltage: (5 ± 0.5) V
Current consumption is not more than 40 mA
BiSS / SSI / Incremental output signal
Max. shaft speed: 8000 rpm
Temperature range -60С + 125C
More
Send request
MagneticSLP-360-M2
product_idm_1
This version with a measuring wheel on the shaft allows to measure movements with high accuracy. The main area of application of this encoder is industrial conveyors.
The measuring range: 0 to 360
Absolute error of measurements in the whole range: not more than ± 0,4 °
Sensor resolution: 12-13 bits
Supply voltage: (5 ± 0.5) V
Current consumption is not more than 40 mA
BiSS / SSI / Incremental output signal
Max. shaft speed: 8000 rpm
Temperature range -60С + 125С
More
Send request
MagneticFSH-01
product_idm_1
FSH-01 - is analog bipolar Hall effect sensor IC which provide a voltage output that is proportional to the applied magnetic field. Sensitivity of FSH-01 is 25 mV/mT (factory programming). FSH-01 have a small 3-pin SIP package
Supply voltage: 5 V ± 0,5 V;
Sensitivity: from 25 mV/mT (factory programmable);
Rise Time: 32 μs (max.)
Frequency Bandwidth (–3 dB): 17 кHz (typ.);
Magnetic field range: up to ± 100 mT;
Sensitivity TempCo: 0,03 %/˚С;
Operating Temperature Range: -60С to 125С
More
Send request
MagneticPSA-13
product_idm_1
The PSA13 is a rotary magnetic encoder IC which uses Hall sensor technology for sensing the magnetic field, tracking angle to code converter, digital processing and interface circuits. The microcircuit has a built-in automatic gain control system, providing a constant signal at the output of the sensor system when the distance between the magnet and microcircuit changes.
Supply voltage 5±10%V,
Supply current < 30mA
Resolution up to 8192 steps per revolution (2.6 ang.min.);
Speed: 11 bits – 60 000 rpm; 12 bits–30 000 rpm; 13 bits –15 000 rpm;
Magnetic field strength range 20-80 mT;
Interfaces:
- SPI/SSI, incremental interface A/B/Z and STEP/DIR, PWM ...
More
Send request
MagneticCSH-12
product_idm_1
CSH-12 – is Hall effect current sensor IC applied in non-contact sensing for provide AC or DC current measuring in PCB conductors. CSH-12 provides Hall effect technology for magnetic field measure, signal amplification, ADC/DAC signal conversion (12-bit SAR A/D converter), ratiometric output (after D/A conversion) ...
Supply voltage: 5 V ± 0,5 V;
Current consumption : 20 mA (30 mA for comparator output);
Sensitivity: from 30 to 300 mV/A (programmable);
Relative total error: ±2 %;
Rise Time: 10 μs;
Output interfaces:
− analog ratiometric;
− programmable PWM;
− 12-bit digital SPI;
More
Send request
MagneticPCA-16
product_idm_1
PCA-16 is an analog-digital dedicated processor, carrying out the transformation of the sine-cosine signal from various sensors position in the linear digital code corresponding to the phase of the sine-cosine (ie, it calculates the arctangent from the input signals). The conversion resolution is up to 16 bits, the conversion time is 500 ns.
Supply voltage: 5 V ± 0.5 V, 3.3V digital input-outputs;
Maximum current consumption: 50 mA;
Resolution up to 16 bits (65536 steps per revolution, 20 arc.sec.);
Speed: 16 bits / 30 rpm; 15 bits / 61 rpm; 14 bits / 122 rpm; 13 bits / 244 rpm;
More
Send request
MagneticPSA-18
product_idm_1
The PSA-18 is used for magnetic off-axis absolute position detection with integrated Hall sensors and special multipole magnetic target wheel. By scanning two separate magnetic track i.e. the master and nonius track the device calculate absolute position within one mechanical revolution.
Supply voltage 5±10%V,
Supply current < 70mA
Resolution up to 18 bits (262144 steps per revolution)
Speed:
-64 pole pairs / 18 bits / 4 000 rpm;
-32 pole pairs / 17 bits / 8 000 rpm;
-16 pole pairs / 16 bits / 16 000 rpm;
More
Send request
MagneticEMPS-I256-5
product_idm_1
The EMPS-I256-5 encoder module is a compact component format for simple customer integration. The encoder consists of a magnetic system and a separate sensor board. Rotation of the magnetic actuator is sensed by a custom encoder chip mounted on the sensor board and processed to give the required output format. Output signal is provided in industry incremental standard.
Supply voltage: 5 ± 0.5 V DC
Supply current: 25 mA
Max rotation speed: 20000 RPM
Quadrature resolution:
256 - quadrature periods per turn
1024 - edges per turn
Output interface: incremental
Operating Temperature Range:-50 °С ..125 °С
More
Send request
Technical support
Our company pays special attention to technical support quality and guaranteeing high level quality service to all our Clients
Performing R and DW
Order Research and Development works
 
CATALOG SERVICES ABOUT US PARTNERS CONTACTS

+7 (495) 018-12-31 | INFO@IDM-PLUS.RU | IDM-PLUS.RU @ 2018